Test strips for drinking water analysis 16 in 1, 50 pcs.

Professional test strips – is a high-quality water tester with precise color coordination and high sensitivity. They are designed for analyzing drinking water and observing its quality standards in aquariums, swimming pools, spas, industrial water, etc.

Indicators for testing:

• total alkalinity
• pH of water
• carbonate hardness
• rigidity
• cyanuric acid
• total chlorine
• free chlorine
• bromine content
• nitrate content
• nitrite content
• iron content
• chromium content
• lead content
• copper content
• mercury content
• fluorine content

How to use:

• dip the strip into water for 2 seconds and remove it;
• Without shaking it, hold the strip horizontally and wait 30 seconds;
• Compare the colors of the strip with the scale of indicators on the jar.

Precautionary measures when using test strips for water analysis:

Avoid touching areas containing reagents to avoid contaminating the test paper and affecting the test results.
After removing the required number of test sheets, keep the remaining test sheets covered and protected from light.
Try to keep the liquid being tested colorless or light. If the liquid is too dark, it can be decolorized by adsorption with activated carbon before testing. If the liquid being tested is relatively turbid, let it stand for a while and take a clean portion for testing after it settles.

Storage conditions

To avoid product damage, both during storage and during use, the following conditions must be observed:

• Store in a dry place at 2℃～30℃, keep away from direct sunlight and moisture;
• Always close the test strip container cap tightly between uses;
• do not touch any areas of the test strips containing reagents;
• do not drink the water sample in which the strip has been dipped;
• use strips before expiration date;
• Dispose of the water sample properly.

Best before date: indicated on the packaging

Set of test strips 50 pcs.

The set is packed in a cardboard box.