Drinking Water Test Strips 16-in-1, 50 pcs. + Pipette and Test Tube

Test strips 16 in 1 – is a convenient way to check the quality of drinking water from wells, water supply systems, reservoirs and other sources, as well as water analysis in a swimming pool, sauna, spa or aquarium. Thanks to these tests, you can easily control the composition of water at home even without special knowledge – the procedure is simple and accessible even to beginners.

Testing is carried out on 16 elements:

1. pH
2. total alkalinity
3. nitrates
4. nitrites
5. total chlorine
6. residual free chlorine
7. rigidity
8. mercury
9. copper
10. bromine
11. chromium
12. lead
13. iron
14. fluoride
15. carbonates
16. cyanuric acid

Instructions for using test strips:

At room temperature, collect a water sample for analysis in a cup or container (5-10 ml).

Immerse the test strip in the water sample for 1-2 seconds.

Holding the strip horizontally, gently tap or shake to remove excess water.

Within 30 seconds (too much or too little time will affect the readings) compare the result. Match the color of the reaction zone of the test strip with the color chart.

In good light, hold the test area against the chart on the vial label. Color changes that appear at the edges of the test areas or after 2 minutes or more are not significant.

Storage conditions

To avoid product damage, both during storage and during use, the following conditions must be observed:

• Store in a dry place at 2℃～30℃, keep away from direct sunlight and moisture;
• Always close the test strip container cap tightly between uses;
• do not touch any areas of the test strips containing reagents;
• do not drink the water sample in which the strip has been dipped;
• use strips before expiration date;
• Dispose of the water sample properly.

Best before date: indicated on the packaging

Set of test strips 50 pcs.

The set is packed in a cardboard box.